Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Ayrshire · KA1

Extractor fans & ventilation in Kilmarnock

If you are planning a bathroom extractor fan in Kilmarnock, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£240–£600 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Kilmarnock
Postcode districts
KA1
Nearby
Irvine, Kilwinning and Ayr
Guide price
£240–£600
Typical time on site
half a day
Water
Soft across most of Ayrshire
Survey
Free, at your home

What does a bathroom extractor fan cost in Kilmarnock?

In Kilmarnock, a bathroom extractor fan typically costs £240–£600 including VAT, based on Scotland prices. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£400–£650
  • Ducting to a roof or soffit vent

Continuous extract

£450–£850
  • Good for windowless rooms

Guide prices for Kilmarnock including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Kilmarnock

We work right across Kilmarnock — KA1 — and in neighbouring Irvine and Kilwinning.

Homes in and around Kilmarnock vary, so we look at the floor, the walls and the water system before we price anything. If your Kilmarnock bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check. Fans fitted in Kilmarnock bathrooms are wired by a qualified electrician, with RCD protection and an isolator outside the room.

Water across much of Ayrshire is soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
  • Wiring by a qualified electrician, with an isolator outside the room and RCD protection
  • Core-drilling through the wall, or ducting through the loft to a roof or soffit vent
  • Run-on timer, humidistat or light-linked switching set up to suit how the room is used

Decisions to make first

Wall or ceiling

A wall fan on an outside wall is the simplest. A ceiling fan over the shower takes steam away at source but needs ducting through the loft.

Intermittent or continuous

An intermittent fan runs during and after use. A continuous fan runs quietly all the time at a low rate and boosts when humidity rises.

Rules that apply in Scotland

In Scotland, the Technical Handbook also uses 15 l/s extract for a bathroom. A replacement fan rarely needs a building warrant, but forming a new bathroom may.

More about extractor fans & ventilation

Extractor fans & ventilation in Kilmarnock: questions

What is the price of a bathroom extractor fan in Kilmarnock?

A bathroom extractor fan in Kilmarnock usually costs £240–£600 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover KA1 in Kilmarnock?

Yes. We cover all of Kilmarnock, including KA1, and nearby Irvine, Kilwinning and Ayr. Survey visits are free and arranged at a time that suits you.

Is the water hard in Kilmarnock?

Water across much of Ayrshire is soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will a bathroom extractor fan in Kilmarnock need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

What extraction rate does a bathroom fan need?

In England, Approved Document F asks for 15 litres per second from an intermittent bathroom fan, or 8 litres per second from a continuous one. Scotland's Technical Handbook also uses 15 l/s for a bathroom, Wales has similar rates in its own Part F, and Northern Ireland sets its rates in Technical Booklet K. Choose a fan that reaches the rate through your actual duct run, not just in open air. Our extractor fan rules guide explains more.

Extractor fans & ventilation in Kilmarnock

Book a free home survey in Kilmarnock. You get a measured layout and an itemised written price before anything is ordered.