Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Edinburgh · EH30

Extractor fans & ventilation in Queensferry

Thinking about a bathroom extractor fan in Queensferry? Here is what it usually costs locally, what the work involves and how we go about it.

£240–£600 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Queensferry
Postcode districts
EH30
Nearby
Broxburn, Dunfermline and Currie
Guide price
£240–£600
Typical time on site
half a day
Water
Soft across most of Edinburgh
Survey
Free, at your home

What does a bathroom extractor fan cost in Queensferry?

Guide price in Queensferry: £240–£600 including VAT, depending on the room and what you choose. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£400–£650
  • Grille in the ceiling

Continuous extract

£450–£850
  • Low-energy fan running all the time

Guide prices for Queensferry including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Queensferry

As well as Queensferry itself (EH30), we survey in Broxburn, Dunfermline and Currie.

Queensferry gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For windowless bathrooms in Queensferry homes, continuous extract that boosts on humidity often works better than a fan tied to the light switch. Fans fitted in Queensferry bathrooms are wired by a qualified electrician, with RCD protection and an isolator outside the room.

Most of Edinburgh is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
  • A backdraught shutter and external grille, so cold air does not blow back in
  • Making good around the fan and checking that it extracts properly at the grille
  • Core-drilling through the wall, or ducting through the loft to a roof or soffit vent

Decisions to make first

Axial, centrifugal or inline

Axial fans suit short, straight runs; centrifugal fans cope better with longer ducts; inline fans sit in the loft and are the quietest in the room.

Replacement air

A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.

Rules that apply in Scotland

In Scotland, the Technical Handbook also uses 15 l/s extract for a bathroom. A replacement fan rarely needs a building warrant, but forming a new bathroom may.

More about extractor fans & ventilation

Extractor fans & ventilation in Queensferry: questions

How much does a bathroom extractor fan cost in Queensferry?

A bathroom extractor fan in Queensferry usually costs £240–£600 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover EH30 in Queensferry?

Yes. We cover all of Queensferry, including EH30, and nearby Broxburn, Dunfermline and Currie. Survey visits are free and arranged at a time that suits you.

Is the water hard in Queensferry?

Most of Edinburgh is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will a bathroom extractor fan in Queensferry need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

What extraction rate does a bathroom fan need?

In England, Approved Document F asks for 15 litres per second from an intermittent bathroom fan, or 8 litres per second from a continuous one. Scotland's Technical Handbook also uses 15 l/s for a bathroom, Wales has similar rates in its own Part F, and Northern Ireland sets its rates in Technical Booklet K. Choose a fan that reaches the rate through your actual duct run, not just in open air. Our extractor fan rules guide explains more.

Extractor fans & ventilation in Queensferry

Book a free home survey in Queensferry. You get a measured layout and an itemised written price before anything is ordered.