Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Greater Manchester · M29

Extractor fans & ventilation in Tyldesley

Extractor fans & ventilation in Tyldesley, planned from measurements taken in your home and priced in writing. We cover M29, M38 and M46 and the surrounding area.

£235–£550 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Tyldesley
Postcode districts
M29, M38, M46
Nearby
Atherton, Leigh and Walkden
Guide price
£235–£550
Typical time on site
half a day
Water
Soft across most of Greater Manchester
Survey
Free, at your home

What does a bathroom extractor fan cost in Tyldesley?

In Tyldesley, a bathroom extractor fan typically costs £235–£550 including VAT, based on North West England prices. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£400–£650
  • Quiet fan in the loft void

Continuous extract

£400–£850
  • Boost on humidity

Guide prices for Tyldesley including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Tyldesley

As well as Tyldesley itself (M29, M38 and M46), we survey in Atherton, Leigh and Walkden.

In Tyldesley, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Tyldesley bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check. In Tyldesley flats, a new vent through an outside wall may need freeholder consent, so we raise it at the survey.

Most of Greater Manchester is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A check of the room, any existing fan or vent, and the shortest route to the outside
  • Run-on timer, humidistat or light-linked switching set up to suit how the room is used
  • A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
  • A backdraught shutter and external grille, so cold air does not blow back in

Decisions to make first

Replacement air

A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.

Axial, centrifugal or inline

Axial fans suit short, straight runs; centrifugal fans cope better with longer ducts; inline fans sit in the loft and are the quietest in the room.

Rules that apply in England

In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.

More about extractor fans & ventilation

Extractor fans & ventilation in Tyldesley: questions

What is the price of a bathroom extractor fan in Tyldesley?

A bathroom extractor fan in Tyldesley usually costs £235–£550 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Tyldesley?

Most of Greater Manchester is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a bathroom extractor fan in Tyldesley?

Building control for Tyldesley is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom extractor fan take?

Allow half a day on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Tyldesley.

Can an extractor fan go above a shower?

Yes, if it suits the zone. The space above a shower or bath, up to 2.25 m, is zone 1, which needs at least IPX4, or IPX5 where water jets are used. Many fans come in mains and low-voltage versions, and the maker's instructions say which zones each can go in. The isolator stays outside the room.

Extractor fans & ventilation in Tyldesley

Book a free home survey in Tyldesley. You get a measured layout and an itemised written price before anything is ordered.