- Postcode districts
- ME13
- Nearby
- Whitstable, Sittingbourne and Canterbury
- Guide price
- £280–£650
- Typical time on site
- half a day
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does a bathroom extractor fan cost in Faversham?
In Faversham, a bathroom extractor fan typically costs £280–£650 including VAT, based on South East England prices. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Extractor fan
- Wired to regulations
Inline fan
- Quiet fan in the loft void
Continuous extract
- Boost on humidity
Guide prices for Faversham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Faversham
We cover every part of Faversham, including ME13, and nearby Whitstable (6.7 miles) and Sittingbourne (7 miles).
Faversham gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We check the duct route at Faversham surveys, because a short, straight run to outside matters more than the fan's headline figure. If your Faversham bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check.
Most of Kent has very hard water. Steam carries that scale onto mirrors and glass, so a fan that clears the room quickly helps on both counts. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Run-on timer, humidistat or light-linked switching set up to suit how the room is used
- A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
- Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
- A backdraught shutter and external grille, so cold air does not blow back in
Decisions to make first
Intermittent or continuous
An intermittent fan runs during and after use. A continuous fan runs quietly all the time at a low rate and boosts when humidity rises.
Replacement air
A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.
Rules that apply in England
In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.
