Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Lancashire · WN8

Extractor fans & ventilation in Skelmersdale

If you are planning a bathroom extractor fan in Skelmersdale, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£235–£550 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Skelmersdale
Postcode districts
WN8
Nearby
Ormskirk, Wigan and Kirkby
Guide price
£235–£550
Typical time on site
half a day
Water
Soft across most of Lancashire
Survey
Free, at your home

What does a bathroom extractor fan cost in Skelmersdale?

Guide price in Skelmersdale: £235–£550 including VAT, depending on the room and what you choose. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£400–£650
  • Quiet fan in the loft void

Continuous extract

£400–£850
  • Boost on humidity

Guide prices for Skelmersdale including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Skelmersdale

We work right across Skelmersdale — WN8 — and in neighbouring Ormskirk and Wigan.

In Skelmersdale, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Skelmersdale bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check. If your Skelmersdale home is listed or in a period terrace, a fan ducted through the loft to a roof vent can avoid a new hole in the front wall, though consent may still apply.

Most of Lancashire is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Core-drilling through the wall, or ducting through the loft to a roof or soffit vent
  • Wiring by a qualified electrician, with an isolator outside the room and RCD protection
  • A check of the room, any existing fan or vent, and the shortest route to the outside
  • A backdraught shutter and external grille, so cold air does not blow back in

Decisions to make first

Intermittent or continuous

An intermittent fan runs during and after use. A continuous fan runs quietly all the time at a low rate and boosts when humidity rises.

Wall or ceiling

A wall fan on an outside wall is the simplest. A ceiling fan over the shower takes steam away at source but needs ducting through the loft.

Rules that apply in England

In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.

More about extractor fans & ventilation

Extractor fans & ventilation in Skelmersdale: questions

How much should I budget for a bathroom extractor fan in Skelmersdale?

A bathroom extractor fan in Skelmersdale usually costs £235–£550 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Skelmersdale?

Most of Lancashire is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a bathroom extractor fan in Skelmersdale?

Building control for Skelmersdale is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a bathroom extractor fan take?

Allow half a day on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Skelmersdale.

What extraction rate does a bathroom fan need?

In England, Approved Document F asks for 15 litres per second from an intermittent bathroom fan, or 8 litres per second from a continuous one. Scotland's Technical Handbook also uses 15 l/s for a bathroom, Wales has similar rates in its own Part F, and Northern Ireland sets its rates in Technical Booklet K. Choose a fan that reaches the rate through your actual duct run, not just in open air. Our extractor fan rules guide explains more.

Extractor fans & ventilation in Skelmersdale

Book a free home survey in Skelmersdale. You get a measured layout and an itemised written price before anything is ordered.