Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Tyne and Wear · NE1

Extractor fans & ventilation in Gateshead

Thinking about a bathroom extractor fan in Gateshead? Here is what it usually costs locally, what the work involves and how we go about it.

£225–£550 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Gateshead
Postcode districts
NE1, NE8, NE9, NE10
Nearby
Newcastle upon Tyne, Felling and Gosforth
Guide price
£225–£550
Typical time on site
half a day
Water
Soft across most of Tyne and Wear
Survey
Free, at your home

What does a bathroom extractor fan cost in Gateshead?

Guide price in Gateshead: £225–£550 including VAT, depending on the room and what you choose. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£350–£650
  • Grille in the ceiling

Continuous extract

£400–£800
  • Low-energy fan running all the time

Guide prices for Gateshead including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Gateshead

As well as Gateshead itself (NE1, NE8, NE9 and 1 more postcode districts), we survey in Newcastle upon Tyne, Felling and Gosforth.

Gateshead has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. If your Gateshead bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check. For windowless bathrooms in Gateshead homes, continuous extract that boosts on humidity often works better than a fan tied to the light switch.

Most of Tyne and Wear is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
  • Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
  • Wiring by a qualified electrician, with an isolator outside the room and RCD protection
  • Core-drilling through the wall, or ducting through the loft to a roof or soffit vent

Decisions to make first

Axial, centrifugal or inline

Axial fans suit short, straight runs; centrifugal fans cope better with longer ducts; inline fans sit in the loft and are the quietest in the room.

Intermittent or continuous

An intermittent fan runs during and after use. A continuous fan runs quietly all the time at a low rate and boosts when humidity rises.

Rules that apply in England

In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.

More about extractor fans & ventilation

Extractor fans & ventilation in Gateshead: questions

How much should I budget for a bathroom extractor fan in Gateshead?

A bathroom extractor fan in Gateshead usually costs £225–£550 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Gateshead really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover NE1 in Gateshead?

Yes. We cover all of Gateshead, including NE1, NE8, NE9 and NE10, and nearby Newcastle upon Tyne, Felling and Gosforth. Survey visits are free and arranged at a time that suits you.

Is the water hard in Gateshead?

Most of Tyne and Wear is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Can an extractor fan go above a shower?

Yes, if it suits the zone. The space above a shower or bath, up to 2.25 m, is zone 1, which needs at least IPX4, or IPX5 where water jets are used. Many fans come in mains and low-voltage versions, and the maker's instructions say which zones each can go in. The isolator stays outside the room.

Extractor fans & ventilation in Gateshead

Book a free home survey in Gateshead. You get a measured layout and an itemised written price before anything is ordered.