Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
England · East of England

En-suites in Bedfordshire

En-suites in Bedfordshire, planned from a measured survey and priced in writing before anything is ordered.

£4,800–£9,500 inc VAT4–8 working days7 towns listed
En-suite shower room off a bedroom with a walk-in shower

What does an en-suite cost in Bedfordshire?

Our guide range in Bedfordshire is £4,800–£9,500 including VAT. Prices in Bedfordshire run at about 6% above the UK guide, based on East of England labour rates.

Refit

£4,200–£7,400
  • Shower, basin and WC replaced

New en-suite

£7,400–£14,750
  • Formed inside an existing bedroom

Guide prices for Bedfordshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Bedfordshire?

Supplies across most of Bedfordshire are very hard. If your supply in Luton is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Luton home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue.

What the job includes

  • A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
  • An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
  • A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
  • A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
  • Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
  • A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve

Decisions to make first

Door type

An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.

Noise

Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.

Night lighting

A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.

Shower size

A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.

Rules that apply in England

Forming an en-suite inside an existing bedroom does not normally need planning permission, but it is usually building-regulations work because it adds drainage, ventilation and electrics. All wiring must meet BS 7671, with 30 mA RCD protection on every circuit in the room. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. In a listed building, a new soil or vent pipe through a wall needs listed building consent.

In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

En-suites in Bedfordshire: questions

How much does an en-suite cost in Bedfordshire?

An en-suite in Bedfordshire typically costs £4,800–£9,500 including VAT, based on East of England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Bedfordshire do you cover?

We cover the whole of Bedfordshire, including Luton, Bedford, Dunstable, Leighton Buzzard, Ampthill, Kempston and Biggleswade. If your town is not listed, we still cover it — get in touch with your postcode.

How long does an en-suite take?

Most jobs take 4–8 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Bedfordshire?

Supplies across most of Bedfordshire are very hard. If your supply in Luton is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What extractor fan does an en-suite need?

In England, a new en-suite needs extract ventilation of at least 15 litres per second if the fan runs intermittently, or 8 litres per second if it runs continuously. Duct it to outside, keep the duct run short, and choose a quiet fan with an overrun timer, because it sits next to a bedroom.

En-suites in Bedfordshire

Book a free home survey anywhere in Bedfordshire. You get a measured layout and an itemised written price.