Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Bedfordshire · LU6

En-suites in Dunstable

Need an en-suite in Dunstable? We plan it around your room and your budget, then do the whole job with one team and one contract.

£4,800–£9,500 inc VAT4–8 working daysFree home survey
En-suite shower room off a bedroom with a walk-in shower, example for Dunstable
Postcode districts
LU6
Nearby
Luton, Leighton Buzzard and Harpenden
Guide price
£4,800–£9,500
Typical time on site
4–8 working days
Water
Very hard across most of Bedfordshire
Survey
Free, at your home

What does an en-suite cost in Dunstable?

As a guide, budget £4,800 to £9,500 including VAT for an en-suite in Dunstable; your written quote will pin it down. Prices in East of England run at about 6% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Refit

£4,200–£7,400
  • Existing en-suite, same layout

New en-suite

£7,400–£14,750
  • Ventilation and electrics to regulations

Guide prices for Dunstable including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Dunstable

In Dunstable we cover LU6; we also cover Luton, 4.5 miles away, and Leighton Buzzard.

Homes in and around Dunstable vary, so we look at the floor, the walls and the water system before we price anything. If the en-suite in your Dunstable home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. If your Dunstable en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.

Supplies across most of Bedfordshire are very hard. If your supply in Dunstable is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
  • A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
  • IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
  • A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve

Decisions to make first

Exposed or concealed valve

An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.

Noise

Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.

Rules that apply in England

In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

More about en-suites

En-suites in Dunstable: questions

How much should I budget for an en-suite in Dunstable?

An en-suite in Dunstable usually costs £4,800–£9,500 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the water hard in Dunstable?

Supplies across most of Bedfordshire are very hard. If your supply in Dunstable is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for an en-suite in Dunstable?

Building control for Dunstable is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does an en-suite take?

Allow 4–8 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Dunstable.

Do I need building regulations approval for an en-suite?

A new en-suite usually does, because it involves new drainage, an extractor fan and new electrical circuits. A like-for-like refit of an existing en-suite normally does not, apart from any electrical work that is notifiable where you live. We tell you which parts apply at the survey.

En-suites in Dunstable

Book a free home survey in Dunstable. You get a measured layout and an itemised written price before anything is ordered.