- Postcode districts
- WA7, WA8
- Nearby
- Runcorn, Halewood and Great Sankey
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Moderately hard across most of Cheshire
- Survey
- Free, at your home
What does an en-suite cost in Widnes?
For Widnes, our guide range for an en-suite is £4,200 to £8,500 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Widnes including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Widnes
As well as Widnes itself (WA7 and WA8), we survey in Runcorn, Halewood and Great Sankey.
In Widnes, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We quote new en-suites in Widnes only after checking the drainage route on site, so the price reflects the work your house actually needs. If you live in a Widnes flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents.
Water across much of Cheshire is moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Widnes. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- Tiling, silicone, testing and making good on the bedroom side of any new walls
Decisions to make first
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

