- Postcode districts
- WA7, WA8
- Nearby
- Widnes, Halewood and Speke
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Moderately hard across most of Cheshire
- Survey
- Free, at your home
What does an en-suite cost in Runcorn?
As a guide, budget £4,200 to £8,500 including VAT for an en-suite in Runcorn; your written quote will pin it down. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Runcorn including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Runcorn
We work right across Runcorn — WA7 and WA8 — and in neighbouring Widnes and Halewood.
Homes in and around Runcorn vary, so we look at the floor, the walls and the water system before we price anything. If you live in a Runcorn flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents. We quote new en-suites in Runcorn only after checking the drainage route on site, so the price reflects the work your house actually needs.
Supplies across most of Cheshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Runcorn. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

