- Postcode districts
- WA7, WA8
- Nearby
- Widnes, Halewood and Speke
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of Cheshire
- Survey
- Free, at your home
What does a new shower cost in Runcorn?
Guide price in Runcorn: £400–£3,300 including VAT, depending on the room and what you choose. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Runcorn including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Runcorn
We work right across Runcorn — WA7 and WA8 — and in neighbouring Widnes and Halewood.
Homes in and around Runcorn vary, so we look at the floor, the walls and the water system before we price anything. If the shower in your Runcorn home swings between hot and cold, a thermostatic valve is usually the fix. If you are replacing a failed electric shower in Runcorn, we check whether the existing cable and circuit suit the new unit.
Most of Cheshire has moderately hard water. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Runcorn. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
