- Postcode districts
- EX1, EX2, EX3, EX4
- Nearby
- Exmouth, Tiverton and Newton Abbot
- Guide price
- £4,600–£9,200
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Devon
- Survey
- Free, at your home
What does an en-suite cost in Exeter?
As a guide, budget £4,600 to £9,200 including VAT for an en-suite in Exeter; your written quote will pin it down. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Exeter including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Exeter
We work right across Exeter — EX1, EX2, EX3 and 1 more postcode districts — and in neighbouring Exmouth and Tiverton.
In a city the size of Exeter, parking and access for a skip are worth sorting before the start date — we will ask at the survey. We quote new en-suites in Exeter only after checking the drainage route on site, so the price reflects the work your house actually needs. For an en-suite in Exeter, the first question at the survey is always where the waste can reach the soil stack.
Supplies across most of Devon are soft. If that holds for your street in Exeter, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- A door that suits a tight space: inward, outward, sliding or a pocket door
Decisions to make first
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

