What does an en-suite cost in Fife?
Our guide range in Fife is £4,300–£8,600 including VAT. Prices in Fife run at about 4% below the UK guide, based on Scotland labour rates.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Fife including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Fife?
Supplies across most of Fife are soft. If that holds for your street in Dunfermline, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. For an en-suite in Dunfermline, the first question at the survey is always where the waste can reach the soil stack.
What the job includes
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A door that suits a tight space: inward, outward, sliding or a pocket door
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
Decisions to make first
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Rules that apply in Scotland
Forming an en-suite inside an existing bedroom does not normally need planning permission, but it is usually building-regulations work because it adds drainage, ventilation and electrics. All wiring must meet BS 7671, with 30 mA RCD protection on every circuit in the room. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. In a listed building, a new soil or vent pipe through a wall needs listed building consent.
In Scotland, forming a new en-suite may need a building warrant because it creates a new bathroom and alters drainage; refitting an existing one rarely does. The Technical Handbook uses the same 15 litres per second extract rate for a bathroom, and the electrics should be tested and certified to BS 7671.