- Postcode districts
- EC1N, NW1, NW3, NW5, NW6, W1T + 11 more
- Nearby
- Holloway, Islington and Archway
- Guide price
- £5,600–£11,250
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does an en-suite cost in Camden Town?
As a guide, budget £5,600 to £11,250 including VAT for an en-suite in Camden Town; your written quote will pin it down. We adjust the national guide for London, where prices are typically about 25% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Camden Town including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Camden Town
As well as Camden Town itself (EC1N, NW1, NW3 and 14 more postcode districts), we survey in Holloway, Islington and Archway.
London homes in Camden Town often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. If the en-suite in your Camden Town home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. We quote new en-suites in Camden Town only after checking the drainage route on site, so the price reflects the work your house actually needs.
Water across much of Greater London is very hard. If your supply in Camden Town is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A door that suits a tight space: inward, outward, sliding or a pocket door
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

