- Postcode districts
- UB3, UB4, UB11
- Nearby
- Southall, Heston and Greenford
- Guide price
- £5,600–£11,250
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does an en-suite cost in Hayes?
As a guide, budget £5,600 to £11,250 including VAT for an en-suite in Hayes; your written quote will pin it down. Prices in London run at about 25% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Hayes including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hayes
In Hayes we cover UB3, UB4 and UB11; we also cover Southall, 2.3 miles away, and Heston.
In Hayes, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. We quote new en-suites in Hayes only after checking the drainage route on site, so the price reflects the work your house actually needs. If you live in a Hayes flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents.
Supplies across most of Greater London are very hard. If your supply in Hayes is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
Decisions to make first
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

