En-suites in Failsworth

Postcode districts: M35, M40, M43
Nearby: Droylsden, Chadderton and Ashton-under-Lyne
Guide price: £4,200–£8,500
Typical time on site: 4–8 working days
Water: Soft across most of Greater Manchester
Survey: Free, at your home

What does an en-suite cost in Failsworth?

For Failsworth, our guide range for an en-suite is £4,200 to £8,500 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Refit

£3,800–£6,600

Shower, basin and WC replaced

Typical

Upgrade

£5,600–£8,900

Full-height porcelain tiling

New en-suite

£6,600–£13,250

Formed inside an existing bedroom

Guide prices for Failsworth including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Failsworth

As well as Failsworth itself (M35, M40 and M43), we survey in Droylsden, Chadderton and Ashton-under-Lyne.

Being a smaller town does not change how we work in Failsworth: free survey, written quote, one team. If the en-suite in your Failsworth home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. If your Failsworth en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.

Water across much of Greater Manchester is soft. If that holds for your street in Failsworth, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear

Decisions to make first

Exposed or concealed valve

An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.

Shower size

A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.

Rules that apply in England

In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

More about en-suites

En-suites in Failsworth: questions

How much should I budget for an en-suite in Failsworth?

An en-suite in Failsworth usually costs £4,200–£8,500 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the home survey in Failsworth really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover M35 in Failsworth?

Yes. We cover all of Failsworth, including M35, M40 and M43, and nearby Droylsden, Chadderton and Ashton-under-Lyne. Survey visits are free and arranged at a time that suits you.

Is the water hard in Failsworth?

Do I need building regulations approval for an en-suite?

A new en-suite usually does, because it involves new drainage, an extractor fan and new electrical circuits. A like-for-like refit of an existing en-suite normally does not, apart from any electrical work that is notifiable where you live. We tell you which parts apply at the survey.