- Postcode districts
- BL0
- Nearby
- Bury, Haslingden and Rawtenstall
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does an en-suite cost in Ramsbottom?
As a guide, budget £4,200 to £8,500 including VAT for an en-suite in Ramsbottom; your written quote will pin it down. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Ramsbottom including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Ramsbottom
We cover every part of Ramsbottom, including BL0, and nearby Bury (3.4 miles) and Haslingden (3.8 miles).
Ramsbottom gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If the en-suite in your Ramsbottom home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. If your Ramsbottom en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.
Most of Greater Manchester is supplied with soft water. If that holds for your street in Ramsbottom, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

