What does an en-suite cost in Hampshire?
Our guide range in Hampshire is £5,000–£10,000 including VAT. Prices in Hampshire run at about 12% above the UK guide, based on South East England labour rates.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Hampshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Hampshire?
- Southampton
- Portsmouth
- Basingstoke
- Gosport
- Waterlooville
- Farnborough
- Eastleigh
- Winchester
- Havant
- Andover
- Fareham
- Aldershot
- Fleet
- Totton
- New Milton
- Bordon
- Hythe
- Yateley
- Alton
- Southsea
- Hedge End
- Romsey
- Hayling Island
- Tadley
- South Hayling
Most of Hampshire has hard water. If your supply in Southampton is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. We quote new en-suites in Southampton only after checking the drainage route on site, so the price reflects the work your house actually needs.
What the job includes
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- A door that suits a tight space: inward, outward, sliding or a pocket door
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Rules that apply in England
Forming an en-suite inside an existing bedroom does not normally need planning permission, but it is usually building-regulations work because it adds drainage, ventilation and electrics. All wiring must meet BS 7671, with 30 mA RCD protection on every circuit in the room. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. In a listed building, a new soil or vent pipe through a wall needs listed building consent.
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.