- Postcode districts
- SO50, SO53
- Nearby
- Hedge End, Southampton and Romsey
- Guide price
- £5,000–£10,000
- Typical time on site
- 4–8 working days
- Water
- Hard across most of Hampshire
- Survey
- Free, at your home
What does an en-suite cost in Eastleigh?
For Eastleigh, our guide range for an en-suite is £5,000 to £10,000 including VAT. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Eastleigh including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Eastleigh
We cover every part of Eastleigh, including SO50 and SO53, and nearby Hedge End (4.3 miles) and Southampton (4.9 miles).
In Eastleigh, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For an en-suite in Eastleigh, the first question at the survey is always where the waste can reach the soil stack. If your Eastleigh en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.
Most of Hampshire has hard water. If your supply in Eastleigh is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A door that suits a tight space: inward, outward, sliding or a pocket door
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
Decisions to make first
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.
