- Postcode districts
- TN13
- Nearby
- Tonbridge, Swanley and Hartley
- Guide price
- £5,000–£10,000
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does an en-suite cost in Sevenoaks?
Our guide price for an en-suite in Sevenoaks is £5,000–£10,000 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Sevenoaks including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Sevenoaks
We work right across Sevenoaks — TN13 — and in neighbouring Tonbridge and Swanley.
In Sevenoaks, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Sevenoaks home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue. If the en-suite in your Sevenoaks home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size.
Most of Kent has very hard water. If your supply in Sevenoaks is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

