- Postcode districts
- CH41, CH42, CH43, CH46, CH49, CH62 + 1 more
- Nearby
- Liverpool, Bootle and Allerton
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does an en-suite cost in Birkenhead?
For Birkenhead, our guide range for an en-suite is £4,200 to £8,500 including VAT. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Birkenhead including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Birkenhead
We work right across Birkenhead — CH41, CH42, CH43 and 4 more postcode districts — and in neighbouring Liverpool and Bootle.
Birkenhead is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. If your Birkenhead en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. If you live in a Birkenhead flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents.
Water across much of Merseyside is soft. If that holds for your street in Birkenhead, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A door that suits a tight space: inward, outward, sliding or a pocket door
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- Tiling, silicone, testing and making good on the bedroom side of any new walls
Decisions to make first
Night lighting
A mirror light or low-level LED strip on its own switch lets you use the en-suite at night without the full glare of the ceiling lights.
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.
