- Postcode districts
- WA11, WA12, WN4
- Nearby
- Ashton in Makerfield, St Helens and Newton-le-Willows
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does an en-suite cost in Haydock?
For Haydock, our guide range for an en-suite is £4,200 to £8,500 including VAT. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Haydock including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Haydock
In Haydock we cover WA11, WA12 and WN4; we also cover Ashton in Makerfield, 1.7 miles away, and St Helens.
Being a smaller town does not change how we work in Haydock: free survey, written quote, one team. If your Haydock home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue. If your Haydock en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.
Supplies across most of Merseyside are soft. If that holds for your street in Haydock, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- A door that suits a tight space: inward, outward, sliding or a pocket door
- A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

