- Postcode districts
- WA9, WA10, WA11, WA12
- Nearby
- Prescot, Ashton in Makerfield and Huyton
- Guide price
- £4,200–£8,500
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does an en-suite cost in St Helens?
As a guide, budget £4,200 to £8,500 including VAT for an en-suite in St Helens; your written quote will pin it down. We adjust the national guide for North West England, where prices are typically about 6% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for St Helens including VAT. Your itemised written quote after the free survey is the price that counts.
Working in St Helens
As well as St Helens itself (WA9, WA10, WA11 and 1 more postcode districts), we survey in Prescot, Ashton in Makerfield and Huyton.
St Helens has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. If the en-suite in your St Helens home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. For an en-suite in St Helens, the first question at the survey is always where the waste can reach the soil stack.
Water across much of Merseyside is soft. If that holds for your street in St Helens, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A door that suits a tight space: inward, outward, sliding or a pocket door
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
Decisions to make first
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

