Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Perth & Kinross · PH1

En-suites in Perth

En-suites in Perth, planned from measurements taken in your home and priced in writing. We cover PH1 and PH2 and the surrounding area.

£4,300–£8,600 inc VAT4–8 working daysFree home survey
En-suite shower room off a bedroom with a walk-in shower, example for Perth
Postcode districts
PH1, PH2
Nearby
Auchterarder, Blairgowrie and Rattray and Crieff
Guide price
£4,300–£8,600
Typical time on site
4–8 working days
Water
Soft across most of Perth and Kinross
Survey
Free, at your home

What does an en-suite cost in Perth?

As a guide, budget £4,300 to £8,600 including VAT for an en-suite in Perth; your written quote will pin it down. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Refit

£3,800–£6,700
  • Shower, basin and WC replaced

New en-suite

£6,700–£13,500
  • Formed inside an existing bedroom

Guide prices for Perth including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Perth

In Perth we cover PH1 and PH2; we also cover Auchterarder, 12.6 miles away, and Blairgowrie and Rattray.

Perth is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. If the en-suite in your Perth home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. We quote new en-suites in Perth only after checking the drainage route on site, so the price reflects the work your house actually needs.

Most of Perth and Kinross is supplied with soft water. If that holds for your street in Perth, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A shower tray or level-access former, an enclosure or walk-in panel, and a thermostatic valve
  • A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
  • A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
  • A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear

Decisions to make first

Exposed or concealed valve

An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.

Noise

Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.

Rules that apply in Scotland

In Scotland, forming a new en-suite may need a building warrant because it creates a new bathroom and alters drainage; refitting an existing one rarely does. The Technical Handbook uses the same 15 litres per second extract rate for a bathroom, and the electrics should be tested and certified to BS 7671.

More about en-suites

En-suites in Perth: questions

How much does an en-suite cost in Perth?

An en-suite in Perth usually costs £4,300–£8,600 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover PH1 and PH2 in Perth?

Yes. We cover all of Perth, including PH1 and PH2, and nearby Auchterarder, Blairgowrie and Rattray and Crieff. Survey visits are free and arranged at a time that suits you.

Is the water hard in Perth?

Most of Perth and Kinross is supplied with soft water. If that holds for your street in Perth, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will an en-suite in Perth need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

How much space do you need for an en-suite?

As a rough guide, about 2.5 m² is the practical minimum for a shower, basin and WC, for example a space of around 1.2 m by 2.1 m. The exact layout depends on where the door, window and soil stack are, so we test it against your measurements rather than a rule of thumb.

En-suites in Perth

Book a free home survey in Perth. You get a measured layout and an itemised written price before anything is ordered.