- Postcode districts
- G60, G81, PA8
- Nearby
- Clydebank, Renfrew and Bearsden
- Guide price
- £4,300–£8,600
- Typical time on site
- 4–8 working days
- Water
- Soft across most of Renfrewshire and Inverclyde
- Survey
- Free, at your home
What does an en-suite cost in Erskine?
As a guide, budget £4,300 to £8,600 including VAT for an en-suite in Erskine; your written quote will pin it down. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Erskine including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Erskine
As well as Erskine itself (G60, G81 and PA8), we survey in Clydebank, Renfrew and Bearsden.
Being a smaller town does not change how we work in Erskine: free survey, written quote, one team. If your Erskine home has one bathroom and a good-sized main bedroom, an en-suite is often the change that eases the morning queue. If your Erskine en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.
Most of Renfrewshire and Inverclyde is supplied with soft water. If that holds for your street in Erskine, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
Decisions to make first
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Rules that apply in Scotland
In Scotland, forming a new en-suite may need a building warrant because it creates a new bathroom and alters drainage; refitting an existing one rarely does. The Technical Handbook uses the same 15 litres per second extract rate for a bathroom, and the electrics should be tested and certified to BS 7671.

