What does an en-suite cost in Wiltshire?
Our guide range in Wiltshire is £4,600–£9,200 including VAT.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Wiltshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Wiltshire?
Most of Wiltshire has hard water. If your supply in Swindon is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. We quote new en-suites in Swindon only after checking the drainage route on site, so the price reflects the work your house actually needs.
What the job includes
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A door that suits a tight space: inward, outward, sliding or a pocket door
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
Decisions to make first
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
Forming an en-suite inside an existing bedroom does not normally need planning permission, but it is usually building-regulations work because it adds drainage, ventilation and electrics. All wiring must meet BS 7671, with 30 mA RCD protection on every circuit in the room. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. In a listed building, a new soil or vent pipe through a wall needs listed building consent.
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.