What does a family bathroom cost in Oxfordshire?
Our guide range in Oxfordshire is £6,700–£12,250 including VAT. Prices in Oxfordshire run at about 12% above the UK guide, based on South East England labour rates.
Essential
- Tiling around bath and basin
Signature
- Fitted vanity and WC unit
Bespoke
- Double basin or freestanding bath
Guide prices for Oxfordshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Oxfordshire?
Water across much of Oxfordshire is hard. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Oxford home has just one bathroom, we plan the fit so the toilet is working again at the end of each day wherever the job allows.
What the job includes
- A layout that keeps a full-size bath, with options for a shower over it or a separate enclosure if the room allows
- Supply of the bath, basin, WC, brassware, shower, screen, tiles and heated towel rail
- Lights, extractor fan and towel rail wired by a qualified electrician, tested and certified
- Moisture-resistant boarding and tanking around the bath and shower before any tiling
- Final silicone, a test of every tap and waste, and a clean handover
- Strip-out of the old suite and tiles, with the waste taken away by a licensed waste carrier
Decisions to make first
Storage
A vanity under the basin, a tall unit or a mirror cabinet. High-level or lockable storage keeps medicines and cleaning products out of reach of small children.
Bath material
Reinforced acrylic is warm to the touch and light on the floor. Steel enamel is harder-wearing and feels more solid, but it draws heat from the water faster.
Screen or curtain
Glass keeps water in better than a curtain and does not go mouldy at the hem. A folding or hinged screen swings out of the way when you are kneeling to bath a child.
Bath shape
A standard 1700 mm bath fits most rooms. A shower bath widens at one end to give more standing room under the shower; a double-ended bath puts the waste in the middle so two children can share without one sitting on the plug.
Rules that apply in England
Refitting a family bathroom in the same room does not need planning permission. The electrics must meet BS 7671, with 30 mA RCD protection on every circuit in the room and at least IPX4 fittings in the zone above the bath, up to 2.25 m. The water fittings rules in each nation limit a new WC to a 6-litre flush and require protection against dirty water flowing back into the supply.
In England, any new circuit, or any change to the wiring in a room with a bath or shower, is notifiable under Part P. Part G limits the hot water at a new bath to 48 °C only in a new dwelling or one created by change of use; it does not apply to a replacement bath in an existing house, but a thermostatic valve is a sensible choice where children bathe.