What does a loft bathroom cost in Essex?
Our guide range in Essex is £6,900–£13,750 including VAT. Prices in Essex run at about 6% above the UK guide, based on East of England labour rates.
Refit
- Shower, basin and WC replaced
Signature
- Pump or macerator where needed
New loft bathroom
- Formed in an existing loft room
Guide prices for Essex including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Essex?
- Southend-on-Sea
- Basildon
- Colchester
- Chelmsford
- Harlow
- Grays
- Braintree
- Brentwood
- Clacton-on-Sea
- South Benfleet
- Canvey Island
- Billericay
- Rayleigh
- Stanford-le-Hope
- Wickford
- Witham
- Pitsea
- Maldon
- Waltham Abbey
- South Ockendon
- Harwich
- Hadleigh
- Walton-on-the-Naze
- Frinton-on-Sea
- Rochford
- Saffron Walden
Supplies across most of Essex are very hard. If your supply in Southend-on-Sea is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. We plan loft bathrooms in Southend-on-Sea around the roof line, so the shower sits where you can stand and the eaves become storage.
What the job includes
- A drainage route from the loft to the soil stack with enough fall, or a pumped waste or macerator where the rules allow it
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- A survey of the headroom across the room, with the usable height marked at each fitting position
- A shower pump on a gravity system, an electric shower, or advice on moving to mains pressure, depending on your system
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
- A check of the floor joists where a bath or large shower tray will sit
Decisions to make first
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Roof window
A roof window over the bath or shower brings daylight and fresh air, but plan the blind for privacy and expect condensation on cold glass.
Where the shower goes
Under the ridge or in a dormer, where the full height is. A walk-in shower with a single panel is usually easier to fit to a roof line than a framed enclosure.
Gravity or pumped waste
Gravity is silent and maintenance-free. A pumped waste or macerator lets fittings sit away from the stack, provided the house has a WC on gravity drainage elsewhere.
Rules that apply in England
A bathroom inside an existing loft room does not usually need planning permission, but forming one is normally building-regulations work because of the new drainage, extract ventilation and electrics. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. Under the water fittings rules, a shower pump must never be connected directly to the mains supply.
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.