- Postcode districts
- SS13, SS14, SS15, SS16
- Nearby
- Pitsea, Stanford-le-Hope and Wickford
- Guide price
- £6,900–£13,750
- Typical time on site
- 6–12 working days
- Water
- Very hard across most of Essex
- Survey
- Free, at your home
What does a loft bathroom cost in Basildon?
As a guide, budget £6,900 to £13,750 including VAT for a loft bathroom in Basildon; your written quote will pin it down. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing loft shower room
Signature
- Fitted furniture to the eaves
New loft bathroom
- Ventilation and electrics to regulations
Guide prices for Basildon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Basildon
As well as Basildon itself (SS13, SS14, SS15 and 1 more postcode districts), we survey in Pitsea, Stanford-le-Hope and Wickford.
Basildon has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. If your Basildon loft shower is weak or the waste drains slowly, the fix is often in the pump or the pipe fall rather than the shower itself. If your Basildon loft conversion has a bedroom but no bathroom, the survey starts with where the soil stack runs and how much headroom you have.
Supplies across most of Essex are very hard. If your supply in Basildon is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A drainage route from the loft to the soil stack with enough fall, or a pumped waste or macerator where the rules allow it
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- A survey of the headroom across the room, with the usable height marked at each fitting position
- A check of the floor joists where a bath or large shower tray will sit
Decisions to make first
Bath or no bath
A bath under the slope makes good use of low space, but the floor has to carry it when it is full of water and someone is in it.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

