- Postcode districts
- L24, L25, L26
- Nearby
- Halewood, Hunts Cross and Garston
- Guide price
- £6,100–£12,250
- Typical time on site
- 6–12 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does a loft bathroom cost in Speke?
For Speke, our guide range for a loft bathroom is £6,100 to £12,250 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Signature
- Pump or macerator where needed
New loft bathroom
- Formed in an existing loft room
Guide prices for Speke including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Speke
We work right across Speke — L24, L25 and L26 — and in neighbouring Halewood and Hunts Cross.
Being a smaller town does not change how we work in Speke: free survey, written quote, one team. If your Speke loft shower is weak or the waste drains slowly, the fix is often in the pump or the pipe fall rather than the shower itself. If your Speke house has a combi boiler, a loft shower can usually run on mains pressure without a pump.
Supplies across most of Merseyside are soft. If that holds for your street in Speke, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fitted furniture made to the eaves, so the low space behind the slope becomes storage
- Electrics by a qualified electrician, tested and certified, then tiling, testing and handover
- A check of the floor joists where a bath or large shower tray will sit
- A check of your hot-water system and of the pressure and flow you actually get at loft level
Decisions to make first
Bath or no bath
A bath under the slope makes good use of low space, but the floor has to carry it when it is full of water and someone is in it.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.
