- Postcode districts
- NE29, NE30, NE33
- Nearby
- Tynemouth, North Shields and Jarrow
- Guide price
- £5,800–£11,750
- Typical time on site
- 6–12 working days
- Water
- Soft across most of Tyne and Wear
- Survey
- Free, at your home
What does a loft bathroom cost in South Shields?
Our guide price for a loft bathroom in South Shields is £5,800–£11,750 including VAT. Labour costs in North East England put local prices at about 10% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing loft shower room
Signature
- Fitted furniture to the eaves
New loft bathroom
- Ventilation and electrics to regulations
Guide prices for South Shields including VAT. Your itemised written quote after the free survey is the price that counts.
Working in South Shields
As well as South Shields itself (NE29, NE30 and NE33), we survey in Tynemouth, North Shields and Jarrow.
Across a large town like South Shields, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. We plan loft bathrooms in South Shields around the roof line, so the shower sits where you can stand and the eaves become storage. If your South Shields loft conversion has a bedroom but no bathroom, the survey starts with where the soil stack runs and how much headroom you have.
Supplies across most of Tyne and Wear are soft. If that holds for your street in South Shields, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- A survey of the headroom across the room, with the usable height marked at each fitting position
- Electrics by a qualified electrician, tested and certified, then tiling, testing and handover
- A shower pump on a gravity system, an electric shower, or advice on moving to mains pressure, depending on your system
Decisions to make first
Bath or no bath
A bath under the slope makes good use of low space, but the floor has to carry it when it is full of water and someone is in it.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

