Shower installation in Wrexham

Postcode districts: LL11, LL12, LL13
Nearby: Brymbo, Rhosllannerchrugog and Buckley
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Moderately hard across most of Clwyd
Survey: Free, at your home

What does a new shower cost in Wrexham?

In Wrexham, a new shower typically costs £400–£3,300 including VAT, based on Wales prices. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Test and handover

Typical

New shower over bath

£750–£1,650

Thermostatic bar shower and riser

New shower with enclosure

£1,400–£3,300

Pipework and waste

Guide prices for Wrexham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Wrexham

As well as Wrexham itself (LL11, LL12 and LL13), we survey in Brymbo, Rhosllannerchrugog and Buckley.

In a city the size of Wrexham, parking and access for a skip are worth sorting before the start date — we will ask at the survey. If you want a shower in your Wrexham home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. For Wrexham homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.

Supplies across most of Clwyd are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Wrexham. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Electrical connection by a qualified electrician, tested and certified
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Removal of the old shower, a full-flow test and a handover on isolating and descaling it

Decisions to make first

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Rules that apply in Wales

In Wales, a new circuit for an electric shower is notifiable under the Welsh Part P, which covers more work than the English version. An unvented cylinder must be fitted by a G3-qualified installer.

More about shower installation

Shower installation in Wrexham: questions

How much should I budget for a new shower in Wrexham?

A new shower in Wrexham usually costs £400–£3,300 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover LL11 in Wrexham?

Yes. We cover all of Wrexham, including LL11, LL12 and LL13, and nearby Brymbo, Rhosllannerchrugog and Buckley. Survey visits are free and arranged at a time that suits you.

Is the water hard in Wrexham?

Who handles building control for a new shower in Wrexham?

Building control for Wrexham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Which type of shower do I need?

The type depends on your hot-water system. With a combi boiler or unvented cylinder, a thermostatic mixer on mains pressure is usually right. With a cold tank and hot cylinder, a mixer runs by gravity, or a power shower or pump can boost it. If hot water is limited, an electric shower heats cold mains water as you use it. Our guide to choosing a shower goes further.