- Postcode districts
- PL31
- Nearby
- St Austell, Newquay and Truro
- Guide price
- £450–£3,600
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Cornwall
- Survey
- Free, at your home
What does a new shower cost in Bodmin?
For Bodmin, our guide range for a new shower is £450 to £3,600 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Bodmin including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bodmin
In Bodmin we cover PL31; we also cover St Austell, 9.2 miles away, and Newquay.
Being a smaller town does not change how we work in Bodmin: free survey, written quote, one team. We test pressure and flow at Bodmin surveys before recommending a shower, so you know how it will perform before you buy. If you want a shower in your Bodmin home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Supplies across most of Cornwall are soft. If that holds for your street in Bodmin, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

