Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
County Antrim · BT40

Shower installation in Larne

We handle shower installation for homeowners and landlords in Larne, with the survey, products, strip-out, trades and fitting under one contract.

£400–£3,100 inc VAThalf a day to 3 daysFree home survey
Thermostatic shower valve and rainfall head being installed, example for Larne
Postcode districts
BT40
Nearby
Carrickfergus, Newtownabbey and Bangor
Guide price
£400–£3,100
Typical time on site
half a day to 3 days
Water
Soft across most of County Antrim
Survey
Free, at your home

What does a new shower cost in Larne?

In Larne, a new shower typically costs £400–£3,100 including VAT, based on Northern Ireland prices. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£900
  • Existing supply and position

New shower with enclosure

£1,300–£3,100
  • Tray, enclosure and valve

Guide prices for Larne including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Larne

We work right across Larne — BT40 — and in neighbouring Carrickfergus and Newtownabbey.

Larne gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you want a shower in your Larne home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If your Larne bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.

Supplies across most of County Antrim are soft. If that holds for your street in Larne, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A bath screen, tray or enclosure where the shower is new
  • Removal of the old shower, a full-flow test and a handover on isolating and descaling it
  • New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
  • Electrical connection by a qualified electrician, tested and certified

Decisions to make first

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Rules that apply in Northern Ireland

In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

More about shower installation

Shower installation in Larne: questions

How much does a new shower cost in Larne?

A new shower in Larne usually costs £400–£3,100 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Larne?

Supplies across most of County Antrim are soft. If that holds for your street in Larne, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Does a new shower in Larne need building control approval?

Building control in Larne is run by the local district council. Where approval is needed, for example for new drainage, we tell you at the survey and handle it as part of the job.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Larne.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.

Shower installation in Larne

Book a free home survey in Larne. You get a measured layout and an itemised written price before anything is ordered.