- Postcode districts
- BT29, BT41
- Nearby
- Ballymena, Newtownabbey and Belfast
- Guide price
- £400–£3,100
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of County Antrim
- Survey
- Free, at your home
What does a new shower cost in Antrim?
Guide price in Antrim: £400–£3,100 including VAT, depending on the room and what you choose. We adjust the national guide for Northern Ireland, where prices are typically about 12% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Antrim including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Antrim
We cover every part of Antrim, including BT29 and BT41, and nearby Ballymena (10.4 miles) and Newtownabbey (12.7 miles).
Being a smaller town does not change how we work in Antrim: free survey, written quote, one team. We test pressure and flow at Antrim surveys before recommending a shower, so you know how it will perform before you buy. For Antrim homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Supplies across most of County Antrim are soft. If that holds for your street in Antrim, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- A bath screen, tray or enclosure where the shower is new
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in Northern Ireland
In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

