- Postcode districts
- BT42, BT43, BT44
- Nearby
- Antrim, Magherafelt and Larne
- Guide price
- £400–£3,100
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of County Antrim
- Survey
- Free, at your home
What does a new shower cost in Ballymena?
As a guide, budget £400 to £3,100 including VAT for a new shower in Ballymena; your written quote will pin it down. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Ballymena including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Ballymena
We cover every part of Ballymena, including BT42, BT43 and BT44, and nearby Antrim (10.4 miles) and Magherafelt (15.2 miles).
Homes in and around Ballymena vary, so we look at the floor, the walls and the water system before we price anything. If you are replacing a failed electric shower in Ballymena, we check whether the existing cable and circuit suit the new unit. If your Ballymena bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Water across much of County Antrim is soft. If that holds for your street in Ballymena, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in Northern Ireland
In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

