Shower installation in Yarm

Postcode districts: TS15, TS16, TS17
Nearby: Thornaby-on-Tees, Stockton-on-Tees and Billingham
Guide price: £400–£3,200
Typical time on site: half a day to 3 days
Water: Moderately hard across most of County Durham
Survey: Free, at your home

What does a new shower cost in Yarm?

As a guide, budget £400 to £3,200 including VAT for a new shower in Yarm; your written quote will pin it down. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£900

Test and handover

Typical

New shower over bath

£700–£1,600

Thermostatic bar shower and riser

New shower with enclosure

£1,350–£3,200

Pipework and waste

Guide prices for Yarm including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Yarm

We cover every part of Yarm, including TS15, TS16 and TS17, and nearby Thornaby-on-Tees (3.1 miles) and Stockton-on-Tees (4.7 miles).

Being a smaller town does not change how we work in Yarm: free survey, written quote, one team. We test pressure and flow at Yarm surveys before recommending a shower, so you know how it will perform before you buy. If you want a shower in your Yarm home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Supplies across most of County Durham are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Yarm. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Removal of the old shower, a full-flow test and a handover on isolating and descaling it
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Yarm: questions

How much does a new shower cost in Yarm?

A new shower in Yarm usually costs £400–£3,200 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the home survey in Yarm really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover TS15 in Yarm?

Yes. We cover all of Yarm, including TS15, TS16 and TS17, and nearby Thornaby-on-Tees, Stockton-on-Tees and Billingham. Survey visits are free and arranged at a time that suits you.

Is the water hard in Yarm?

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.