- Postcode districts
- EX39
- Nearby
- Barnstaple, Tiverton and Exeter
- Guide price
- £450–£3,600
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Devon
- Survey
- Free, at your home
What does a new shower cost in Bideford?
As a guide, budget £450 to £3,600 including VAT for a new shower in Bideford; your written quote will pin it down. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Bideford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bideford
We work right across Bideford — EX39 — and in neighbouring Barnstaple and Tiverton.
In Bideford, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you want a shower in your Bideford home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. For Bideford homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Water across much of Devon is soft. If that holds for your street in Bideford, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

