Shower installation in Brixham

Postcode districts: TQ4, TQ5
Nearby: Paignton, Torquay and Newton Abbot
Guide price: £450–£3,600
Typical time on site: half a day to 3 days
Water: Soft across most of Devon
Survey: Free, at your home

What does a new shower cost in Brixham?

For Brixham, our guide range for a new shower is £450 to £3,600 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£1,000

Test and handover

Typical

New shower over bath

£800–£1,850

Thermostatic bar shower and riser

New shower with enclosure

£1,550–£3,600

Pipework and waste

Guide prices for Brixham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Brixham

In Brixham we cover TQ4 and TQ5; we also cover Paignton, 3.7 miles away, and Torquay.

Being a smaller town does not change how we work in Brixham: free survey, written quote, one team. We test pressure and flow at Brixham surveys before recommending a shower, so you know how it will perform before you buy. If you want a shower in your Brixham home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.

Water across much of Devon is soft. If that holds for your street in Brixham, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A check of your hot-water system, water pressure and flow rate
Removal of the old shower, a full-flow test and a handover on isolating and descaling it
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head

Decisions to make first

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Brixham: questions

How much does a new shower cost in Brixham?

A new shower in Brixham usually costs £450–£3,600 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover TQ4 and TQ5 in Brixham?

Yes. We cover all of Brixham, including TQ4 and TQ5, and nearby Paignton, Torquay and Newton Abbot. Survey visits are free and arranged at a time that suits you.

Is the water hard in Brixham?

Who handles building control for a new shower in Brixham?

Building control for Brixham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can you replace an electric shower with a mixer?

Yes, if your hot-water system can supply it. That means running hot and cold pipes to the shower position and making the old shower circuit safe or reusing it. It is worth doing if you have a combi or unvented cylinder with good flow.