- Postcode districts
- BN10
- Nearby
- Rottingdean, Seaford and Lewes
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of East Sussex
- Survey
- Free, at your home
What does a new shower cost in Peacehaven?
As a guide, budget £500 to £3,900 including VAT for a new shower in Peacehaven; your written quote will pin it down. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Peacehaven including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Peacehaven
We work right across Peacehaven — BN10 — and in neighbouring Rottingdean and Seaford.
Being a smaller town does not change how we work in Peacehaven: free survey, written quote, one team. For Peacehaven homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. We test pressure and flow at Peacehaven surveys before recommending a shower, so you know how it will perform before you buy.
Water across much of East Sussex is hard. If your supply in Peacehaven is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Electrical connection by a qualified electrician, tested and certified
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

