Shower installation in Basildon

Postcode districts: SS13, SS14, SS15, SS16
Nearby: Pitsea, Stanford-le-Hope and Wickford
Guide price: £500–£3,700
Typical time on site: half a day to 3 days
Water: Very hard across most of Essex
Survey: Free, at your home

What does a new shower cost in Basildon?

Guide price in Basildon: £500–£3,700 including VAT, depending on the room and what you choose. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,050

Test and handover

Typical

New shower over bath

£850–£1,900

Thermostatic bar shower and riser

New shower with enclosure

£1,600–£3,700

Pipework and waste

Guide prices for Basildon including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Basildon

In Basildon we cover SS13, SS14, SS15 and 1 more postcode districts; we also cover Pitsea, 2.2 miles away, and Stanford-le-Hope.

Basildon has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. If you are replacing a failed electric shower in Basildon, we check whether the existing cable and circuit suit the new unit. We test pressure and flow at Basildon surveys before recommending a shower, so you know how it will perform before you buy.

Supplies across most of Essex are very hard. If your supply in Basildon is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Electrical connection by a qualified electrician, tested and certified
A check of your hot-water system, water pressure and flow rate
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Basildon: questions

How much should I budget for a new shower in Basildon?

A new shower in Basildon usually costs £500–£3,700 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Basildon.

Is the home survey in Basildon really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover SS13 in Basildon?

Yes. We cover all of Basildon, including SS13, SS14, SS15 and SS16, and nearby Pitsea, Stanford-le-Hope and Wickford. Survey visits are free and arranged at a time that suits you.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.