- Postcode districts
- SS16, SS17
- Nearby
- Basildon, Pitsea and Grays
- Guide price
- £500–£3,700
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Essex
- Survey
- Free, at your home
What does a new shower cost in Stanford-le-Hope?
Guide price in Stanford-le-Hope: £500–£3,700 including VAT, depending on the room and what you choose. We adjust the national guide for East of England, where prices are typically about 6% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Stanford-le-Hope including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Stanford-le-Hope
We cover every part of Stanford-le-Hope, including SS16 and SS17, and nearby Basildon (3.3 miles) and Pitsea (4.3 miles).
In Stanford-le-Hope, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If you are replacing a failed electric shower in Stanford-le-Hope, we check whether the existing cable and circuit suit the new unit. If the shower in your Stanford-le-Hope home swings between hot and cold, a thermostatic valve is usually the fix.
Water across much of Essex is very hard. If your supply in Stanford-le-Hope is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- A bath screen, tray or enclosure where the shower is new
- Electrical connection by a qualified electrician, tested and certified
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
