- Postcode districts
- CB10
- Nearby
- Haverhill, Bishops Stortford and Royston
- Guide price
- £500–£3,700
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Essex
- Survey
- Free, at your home
What does a new shower cost in Saffron Walden?
As a guide, budget £500 to £3,700 including VAT for a new shower in Saffron Walden; your written quote will pin it down. We adjust the national guide for East of England, where prices are typically about 6% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Saffron Walden including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Saffron Walden
We cover every part of Saffron Walden, including CB10, and nearby Haverhill (9.3 miles) and Bishops Stortford (11.1 miles).
Saffron Walden gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For Saffron Walden homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If you want a shower in your Saffron Walden home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Water across much of Essex is very hard. If your supply in Saffron Walden is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
