- Postcode districts
- SG8
- Nearby
- Letchworth Garden City, Biggleswade and Saffron Walden
- Guide price
- £500–£3,700
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Cambridgeshire
- Survey
- Free, at your home
What does a new shower cost in Royston?
Our guide price for a new shower in Royston is £500–£3,700 including VAT. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Royston including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Royston
In Royston we cover SG8; we also cover Letchworth Garden City, 9.8 miles away, and Biggleswade.
Royston gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are replacing a failed electric shower in Royston, we check whether the existing cable and circuit suit the new unit. If you want a shower in your Royston home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Supplies across most of Cambridgeshire are very hard. If your supply in Royston is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- A bath screen, tray or enclosure where the shower is new
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

