Shower installation in Stirling

Postcode districts: FK7, FK8, FK9, FK15
Nearby: Alloa, Falkirk and Grangemouth
Guide price: £450–£3,400
Typical time on site: half a day to 3 days
Water: Soft across most of the Forth Valley
Survey: Free, at your home

What does a new shower cost in Stirling?

For Stirling, our guide range for a new shower is £450 to £3,400 including VAT. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£950

Test and handover

Typical

New shower over bath

£750–£1,750

Thermostatic bar shower and riser

New shower with enclosure

£1,450–£3,400

Pipework and waste

Guide prices for Stirling including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Stirling

In Stirling we cover FK7, FK8, FK9 and 1 more postcode districts; we also cover Alloa, 5.7 miles away, and Falkirk.

Homes in and around Stirling vary, so we look at the floor, the walls and the water system before we price anything. For Stirling homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If the shower in your Stirling home swings between hot and cold, a thermostatic valve is usually the fix.

Water across much of the Forth Valley is soft. If that holds for your street in Stirling, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
A check of your hot-water system, water pressure and flow rate
Removal of the old shower, a full-flow test and a handover on isolating and descaling it

Decisions to make first

Head and handset

A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in Scotland

In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.

More about shower installation

Shower installation in Stirling: questions

How much should I budget for a new shower in Stirling?

A new shower in Stirling usually costs £450–£3,400 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover FK7 in Stirling?

Yes. We cover all of Stirling, including FK7, FK8, FK9 and FK15, and nearby Alloa, Falkirk and Grangemouth. Survey visits are free and arranged at a time that suits you.

Is the water hard in Stirling?

Will a new shower in Stirling need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

Which type of shower do I need?

The type depends on your hot-water system. With a combi boiler or unvented cylinder, a thermostatic mixer on mains pressure is usually right. With a cold tank and hot cylinder, a mixer runs by gravity, or a power shower or pump can boost it. If hot water is limited, an electric shower heats cold mains water as you use it. Our guide to choosing a shower goes further.