- Postcode districts
- CR0, CR2, CR5, CR7, CR8, CR9 + 2 more
- Nearby
- Mitcham, Purley and Streatham
- Guide price
- £550–£4,400
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does a new shower cost in Croydon?
Our guide price for a new shower in Croydon is £550–£4,400 including VAT. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Croydon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Croydon
We work right across Croydon — CR0, CR2, CR5 and 5 more postcode districts — and in neighbouring Mitcham and Purley.
London homes in Croydon often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. If the shower in your Croydon home swings between hot and cold, a thermostatic valve is usually the fix. If your Croydon bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Most of Greater London has very hard water. If your supply in Croydon is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
