- Postcode districts
- RG26
- Nearby
- Basingstoke, Thatcham and Newbury
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Hampshire
- Survey
- Free, at your home
What does a new shower cost in Tadley?
In Tadley, a new shower typically costs £500–£3,900 including VAT, based on South East England prices. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Tadley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Tadley
As well as Tadley itself (RG26), we survey in Basingstoke, Thatcham and Newbury.
Being a smaller town does not change how we work in Tadley: free survey, written quote, one team. If you are replacing a failed electric shower in Tadley, we check whether the existing cable and circuit suit the new unit. If your Tadley bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Supplies across most of Hampshire are hard. If your supply in Tadley is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- Electrical connection by a qualified electrician, tested and certified
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
