Shower installation in Swanley

Postcode districts: BR8
Nearby: Bexley, Dartford and Welling
Guide price: £500–£3,900
Typical time on site: half a day to 3 days
Water: Very hard across most of Kent
Survey: Free, at your home

What does a new shower cost in Swanley?

For Swanley, our guide range for a new shower is £500 to £3,900 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,100

Existing supply and position

Typical

New shower over bath

£900–£2,000

Tiling the bath surround

New shower with enclosure

£1,700–£3,900

Tray, enclosure and valve

Guide prices for Swanley including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Swanley

We work right across Swanley — BR8 — and in neighbouring Bexley and Dartford.

Swanley gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If the shower in your Swanley home swings between hot and cold, a thermostatic valve is usually the fix. If you are replacing a failed electric shower in Swanley, we check whether the existing cable and circuit suit the new unit.

Most of Kent has very hard water. If your supply in Swanley is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
A bath screen, tray or enclosure where the shower is new
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Swanley: questions

What is the price of a new shower in Swanley?

A new shower in Swanley usually costs £500–£3,900 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the water hard in Swanley?

Who handles building control for a new shower in Swanley?

Building control for Swanley is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Swanley.

Can you replace an electric shower with a mixer?

Yes, if your hot-water system can supply it. That means running hot and cold pipes to the shower position and making the old shower circuit safe or reusing it. It is worth doing if you have a combi or unvented cylinder with good flow.