- Postcode districts
- G71, ML1, ML4
- Nearby
- Motherwell, Coatbridge and Blantyre
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Lanarkshire
- Survey
- Free, at your home
What does a new shower cost in Bellshill?
For Bellshill, our guide range for a new shower is £450 to £3,400 including VAT. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Bellshill including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Bellshill
We cover every part of Bellshill, including G71, ML1 and ML4, and nearby Motherwell (2.1 miles) and Coatbridge (3.2 miles).
Bellshill gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you are replacing a failed electric shower in Bellshill, we check whether the existing cable and circuit suit the new unit. We test pressure and flow at Bellshill surveys before recommending a shower, so you know how it will perform before you buy.
Most of Lanarkshire is supplied with soft water. If that holds for your street in Bellshill, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A bath screen, tray or enclosure where the shower is new
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in Scotland
In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.
