Shower installation in Chorley

Postcode districts: PR6, PR7
Nearby: Horwich, Leyland and Darwen
Guide price: £400–£3,300
Typical time on site: half a day to 3 days
Water: Soft across most of Lancashire
Survey: Free, at your home

What does a new shower cost in Chorley?

Guide price in Chorley: £400–£3,300 including VAT, depending on the room and what you choose. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£950

Test and handover

Typical

New shower over bath

£750–£1,700

Thermostatic bar shower and riser

New shower with enclosure

£1,400–£3,300

Pipework and waste

Guide prices for Chorley including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Chorley

We work right across Chorley — PR6 and PR7 — and in neighbouring Horwich and Leyland.

Homes in and around Chorley vary, so we look at the floor, the walls and the water system before we price anything. For Chorley homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. We test pressure and flow at Chorley surveys before recommending a shower, so you know how it will perform before you buy.

Supplies across most of Lancashire are soft. If that holds for your street in Chorley, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
A bath screen, tray or enclosure where the shower is new
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Electrical connection by a qualified electrician, tested and certified

Decisions to make first

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Chorley: questions

How much should I budget for a new shower in Chorley?

A new shower in Chorley usually costs £400–£3,300 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover PR6 and PR7 in Chorley?

Yes. We cover all of Chorley, including PR6 and PR7, and nearby Horwich, Leyland and Darwen. Survey visits are free and arranged at a time that suits you.

Is the water hard in Chorley?

Who handles building control for a new shower in Chorley?

Building control for Chorley is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can you replace an electric shower with a mixer?

Yes, if your hot-water system can supply it. That means running hot and cold pipes to the shower position and making the old shower circuit safe or reusing it. It is worth doing if you have a combi or unvented cylinder with good flow.